DTC P1C00: Battery Monitor Module "A" Performance: Notes
1. -
DTC detecting condition:
Detected when two consecutive driving cycles with fault occur.
Trouble symptom:
Auto Start Stop does not operate.
CAUTION:
After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Refer to AUTO START STOP (DIAGNOSTICS)>Basic Diagnostic Procedure .
NOTE:
For diagnostic procedure, refer to "DTC P1C00" in "Engine (Diagnostics)". Refer to ENGINE (DIAGNOSTICS) (H4DO)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC P1C00 BATTERY MONITOR MODULE "A" PERFORMANCE
. Refer to ENGINE (DIAGNOSTICS) (H4DOTC)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC P1C00 BATTERY MONITOR MODULE "A" PERFORMANCE
.