Section 4 (Engine Starting System & Charging System (2.4L)): General Description: Specification
WARNING: This page is about a different variant/trim than selected.
| Item | Specifications | ||
|---|---|---|---|
| Starter | Type | Reduction type | |
| Model | 438000-4940 | ||
| Manufacturer | DENSO | ||
| Voltage and output | 12 V - 1.6 kW | ||
| Direction of rotation | Counter clockwise (when observed from pinion) | ||
| Number of pinion teeth | 14 | ||
| No-load characteristics | Voltage | 11.5 V | |
| Current | 100 A or less | ||
| Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, each with load response control system | |
| Model | A2TV1881ZC | ||
| Manufacture | Mitsubishi Electric | ||
| Voltage and output | 12 V - 190 A | ||
| Polarity on ground side | Negative | ||
| Direction of rotation | Clockwise (when observed from pulley side) | ||
| Stator connection | 3-phase type | ||
| Output current | 1, 500 r/min - 55 A or more [13.5 V] 2, 500 r/min - 152 A or more [13.5 V] 5, 000 r/min - 182 A or more [13.5 V] |
||
| Regulated voltage | 14.0 - 14.6 V [20°C (68°F)] | ||
| Rotor slip ring outer diameter | Standard | 22.7 mm (0.894 in) | |
| Limit | 22.1 mm (0.870 in) | ||
| Battery | Type | LN2 | |
| Type | EFB (Enhanced Flooded Battery) | ||
| Nominal capacity | 5 HR: 51 Ah, 20HR: 62 Ah [25°C (77°F)] | ||
| Nominal voltage | 12 V | ||
| CCA | 620 A | ||