Ball Joint: Inspection
- Check that there is no looseness by moving the upper and lower portions of front tire in an axial direction with the brake pedal depressed.
- Looseness exists → Replace the ball joint COMPL. Refer to FRONT SUSPENSION>Ball Joint>REMOVAL .
- Check that there is no looseness by moving the upper and lower portions of front tire in an axial direction with the brake pedal released.
- Looseness exists → Check the front hub unit bearing. Refer to Propeller Shaft/Drive Shaft/Axle>Front Hub Unit Bearing>Inspection .
- Visually inspect the dust cover, and replace the ball joint COMPL if the dust cover is damaged.