LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Installation >> Stabilizer Bushing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stabilizer Bushing

  1. Before installation, inspect the following items and replace any faulty part with a new one. Check the rubber bushing stabilizer front for abnormal cracks, fatigue or damage.
  2. Install the rubber bushing stabilizer front.
  3. Install the clamp stabilizer.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  4. Install the front exhaust pipe. (H4DO model) Refer to Exhaust (H4DO)>Front Exhaust Pipe>Installation .
  5. Install the center exhaust pipe (rear). (H4DOTC model) Refer to Exhaust (H4DOTC)>Center Exhaust Pipe>Installation>Center Exhaust Pipe (Rear) .
  6. Install the under cover front. Refer to Exterior/Interior Trim>Front Under Cover>Installation .
scientia non olet · About LEMON Manuals