LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Removal >> Stabilizer Bushing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stabilizer Bushing

  1. Lift up the vehicle.
  2. Remove the under cover front. Refer to Exterior/Interior Trim>Front Under Cover>Removal .
  3. Remove the front exhaust pipe. (H4DO model) Refer to Exhaust (H4DO)>Front Exhaust Pipe>Removal .
  4. Remove the center exhaust pipe (rear). (H4DOTC model) Refer to Exhaust (H4DOTC)>Center Exhaust Pipe>Removal>Center Exhaust Pipe (Rear) .
  5. Remove the bolt and nut, and remove the clamp stabilizer.
    G13199300Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the rubber bushing stabilizer front.
scientia non olet · About LEMON Manuals