LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (Diagnostics) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P062F: Internal Control Module EEPROM Error >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P062F: Internal Control Module EEPROM Error: Notes

1. - 

DTC detecting condition: 

Detected when two consecutive driving cycles with fault occur.

Trouble symptom: 

TCM EEPROM is faulty.

CAUTION: After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Refer to TRANSMISSION (DIAGNOSTICS)>Basic Diagnostic Procedure .
  1. CHECK DTC  .
    1. Using the Subaru Select Monitor, perform the clear memory of [Transmission]. Refer to COMMON (DIAG)>CLEAR MEMORY .
    2. Read the DTC of [Transmission] using the Subaru Select Monitor. Refer to TRANSMISSION (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .

    Is DTC P062F displayed?

    Yes  : Replace the TCM. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TRANSMISSION CONTROL MODULE (TCM) . Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION CONTROL MODULE (TCM) .

    No  : Current condition is normal. Check for interference from noise, etc.