Inspection Mode K
| DTC | Description & trouble part | Condition |
|---|---|---|
| P2714 | PRESSURE CONTROL SOLENOID "D" PERFORMANCE/STUCK OFF | Perform inspection mode K twice (ENGINE TYPE FA) |
Diagnostic procedure:
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is not completed. Refer to TRANSMISSION (DIAGNOSTICS)>All Readiness Diagnostic Code(s) .
- Start the engine under condition that ATF temperature is at 60°C (140°F) or more and less than 80°C (176°F).
- Drive for 30 seconds at a constant speed of 70 km/h (44 MPH) with the engine speed at 1200 rpm.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is completed. Refer to TRANSMISSION (DIAGNOSTICS)>All Readiness Diagnostic Code(s) .