Universal Joint: Inspection

Check for wear, damage or any other faults.

1. Check the universal joint assembly - steering for excessive looseness.

   Service limit: 

   Play of the universal joint assembly - steering: 0 mm (0 in)

   Courtesy of SUBARU OF AMERICA, INC.

2. Measure the swing torque of the universal joint assembly - steering.
   1. Place the universal joint assembly - steering between wooden blocks and fix it on a vise.
   2. With the yoke (a) of gearbox side facing up, measure the swing torque in two directions.

      Courtesy of SUBARU OF AMERICA, INC.

      Service limit: 

      Maximum load: 3.8 N (0.39 kgf, 0.86 lbf) or less

   3. With the yoke (b) of the column assembly - steering side facing up, measure the swing torque in two directions.

      Courtesy of SUBARU OF AMERICA, INC.

      Service limit: 

      Maximum load: 7.3 N (0.74 kgf, 1.64 lbf) or less

   4. Replace as necessary, if it is found defective.