Keyless Access Control Module: Installation
CAUTION:
When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type D" described in "REGISTRATION MANUAL FOR IMMOBILIZER"
.
- Install the keyless access control module.
Tightening torque:
7.5 N.m (0.8 kgf.m, 5.5 ft.lb)
- Install the pocket COMPL and the panel instrument passenger.
- Install the cover side sill front FR and the cover side sill front RR.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .