Keyless Entry Control Module: Installation
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM"
. Ref. to AIRBAG SYSTEM>General Description>CAUTION
.
- Install the keyless entry control module.
Tightening torque:
7.5 N.m (0.8 kgf.m, 5.5 ft.b)
- Install the trim panel assembly apron RH. Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>INSTALLATION .
- Install the third seats. Ref. to SEATS>Third Seat>INSTALLATION .
- Connect the ground terminal to battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- When the keyless entry control module is replaced, register the transmitter ID. (Model with TPMS) Ref. to TIRE PRESSURE MONITOR (DIAGNOSTICS)>Register Transmitter (ID)>OPERATION .