Horn System: General Description: Caution

When performing service operation, refer to "Repair Contents" in "General Description". Ref. to REPAIR CONTENTS>REPAIR CONTENTS .
Before performing vehicle maintenance, turn the ignition switch to OFF and disconnect the ground terminal from the battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
When replacing the audio and MFD parts provided with memory functions, record the memory contents before disconnecting the ground terminal from the battery sensor.
Be careful of the following items. Failing to do so may cause the airbag system malfunction.
- Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. When using a tester on these circuits, follow the cautions of "AIRBAG SYSTEM".
- Be careful not to damage the airbag system wiring harness when servicing the electrical parts around the steering column, Ref. to AIRBAG SYSTEM>General Description>CAUTION .
If the hydraulic unit assembly VDC, bracket COMPL hydraulic unit VDC, steering wheel and the sensor assembly VDC steering (steering roll connector) are removed, installed or replaced, perform "VDC SENSOR MIDPOINT SETTING MODE" of the VDC. Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)>ADJUSTMENT .