LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Oil Pressure Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pressure Switch: Installation

  1. Apply seal material to the bolt threads of oil pressure switch.
    NOTE: Before applying the seal material, degrease the oil pressure switch and the thread portions of the chain cover.

    Seal material: 

    THREE BOND 1324 (Part No. 004403042) or equivalent

  2. Install the oil pressure switch, and connect the connector.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

  3. Check the engine oil level and replenish the engine oil if necessary. Ref. to LUBRICATION (H4DOTC)>Engine Oil>INSPECTION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals