LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> General Information >> Identification >> General Information & Specifications >> Pre-Delivery Inspection >> Front Hood Lock Release >> Immobilizer System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Immobilizer System

  1. Check that the engine starts with all keys that are equipped on vehicle.
  2. Check that the security indicator light blinks in 60 seconds after turning the ignition switch from ON to ACC or to OFF, and immediately after removing the key. (Model without keyless access with push button start)
  3. Immediately after turning ignition switch from ON to OFF, and immediately after opening/closing a door while the ignition switch is in ON or ACC with the engine stopped and the access key is outside the vehicle, check that the security indicator light is blinking. (Model with keyless access with push button start)
    NOTE: If malfunctions occur, refer to "Basic Diagnostic Procedure" of "IMMOBILIZER (DIAGNOSTICS)". Ref. to IMMOBILIZER (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .