LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> General Information >> Identification >> General Information & Specifications >> Pre-Delivery Inspection >> Front Hood Lock Release >> Seat Belt
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Seat Belt

  1. Check installation condition of seat belt.
  2. Pull out the seat belt and then release it. Check that the belt retracts smoothly.
  3. Check seat belt warning function.
    1. Turn the ignition switch to ON with the driver's, passenger's and rear seat belts detached.
    2. Check the driver's and passenger's seat belt warning light blink for approx. 6 seconds and the buzzer sounds intermittently.
    3. Then, check the seat belt warning light illuminates and blinks repeatedly at a cycle of approx. 15 seconds. (If no passenger is on the passenger's seat, the seat belt warning light on passenger's seat does not operate.)
    4. Check that the rear seat belt warning light illuminates.
    5. Then, check that the rear seat belt warning light turns off when the rear seat belts are fastened.
scientia non olet · About LEMON Manuals