LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Seat Belt >> Removal >> Belt Assembly Front Inn
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Belt Assembly Front Inn

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For models with the power seat, move the seat to the front-most position before removing the ground terminal from the battery sensor.
  3. Remove the front seats. Ref. to SEATS>Front Seat>REMOVAL .
  4. Remove the belt assembly front INN.
    1. Remove the clip for the seat belt harness located under the seat cushion.
    2. Remove the nut, and then remove the belt assembly front INN.
G11245887Courtesy of SUBARU OF AMERICA, INC.
G11245888Courtesy of SUBARU OF AMERICA, INC.
NOTE: For details about harness routing behind the seat, refer to "SEATS" information. Ref. to SEATS>Front Seat>ASSEMBLY .
scientia non olet · About LEMON Manuals