Stabilizer Bushing

1. Before installation, inspect the following items and replace any faulty part with a new one.

   Check the rubber bushing stabilizer front for abnormal cracks, fatigue or damage.

2. Install the rubber bushing stabilizer front.
3. Install the clamp stabilizer.

   Tightening torque: 

   25 N.m (2.5 kgf-m, 18.4 ft-lb)

4. Install the center exhaust pipe (rear). Ref. to EXHAUST (H4DOTC)>Center Exhaust Pipe>INSTALLATION>CENTER EXHAUST PIPE (REAR) .
5. Install the under cover front.

Tightening torque: 

18 N.m (1.8 kgf-m, 13.3 ft-lb)