LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Diagnostics) >> Inspection Mode >> Procedure >> Preparation For The Inspection Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For The Inspection Mode

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and clearing memory, check that no DTC remains.
    NOTE:
    • Perform the inspection mode after warming up the engine except when the ATF temperature at engine start is specified.
    • For DTC P162B, refer to DTC P162A in Engine (Diagnostics). Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>INSPECTION MODE .
scientia non olet · About LEMON Manuals