LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Primary Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Install the primary speed sensor using a new O-ring, and connect the connector.
    NOTE: Apply CVTF to the O-rings.

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.7 ft-lb)

  2. Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>Intercooler>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals