LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control Systems >> Select Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Release the shift lock using a screwdriver, etc. and shift the select lever to the "N range".
    G13199468Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the center exhaust cover (front). Ref. to EXHAUST (H4DOTC)>Rear Exhaust Pipe>REMOVAL .
  4. Disconnect the select cable from the transmission main body.
    CAUTION: Do not apply excessive load while holding the part (a).
    G13591814Courtesy of SUBARU OF AMERICA, INC.
    G13225470Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the adjusting nut (rear).
    G13591853Courtesy of SUBARU OF AMERICA, INC.
  6. Raise the claw of clamp and remove the select cable together with the clamp.
    CAUTION: Do not apply excessive load while holding the part (a).
    G13591854Courtesy of SUBARU OF AMERICA, INC.
    G13225510Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the clamp from the select cable.
  8. Remove the cable plate.
    G13225512Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals