LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except For HEV) >> Fuel Injector >> Removal >> Fuel Injector RH
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector RH

CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the clip from the air intake boot, and loosen the clamp.
    G11252776Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the air intake boot, and place it aside so that it does not interfere with the work.
    CAUTION: Be careful not to pull out the PCV hose.
    G11252777Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the high-pressure fuel delivery pipe assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO (EXCEPT FOR HEV))>HIGH PRESSURE FUEL DELIVERY PIPE>REMOVAL>HIGH-PRESSURE FUEL DELIVERY PIPE ASSEMBLY .
  5. Disconnect the connector (A) from the fuel pressure sensor, and disconnect the connector (B) from the fuel injector.
  6. Remove the bolts securing the fuel injector pipe RH, and remove the fuel injector and the fuel injector pipe RH as an assembly.
    G11252811Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel injectors from the fuel injector pipe RH.
    • 2.0 L model
      G11252812Courtesy of SUBARU OF AMERICA, INC.
    • 2.5 L model
      G13223872Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals