LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Rear Gate System >> Power Rear Gate Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Rear Gate Control Module: Installation

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
  1. Install the power rear gate control module.
    NOTE: Connect the connectors in reverse order of removal.
  2. Install the trim panel assembly D pillar LH and the trim panel assembly apron LH. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
  3. Install the rear seat cushion assembly. Ref. to SEATS>REAR SEAT>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
scientia non olet · About LEMON Manuals