VDCCM Parameter Check
NOTE:
The parameter data registered in the VDCCM is shown on the display.
- Using the Subaru Select Monitor, select [Confirm on parameter] on the [Work Support] display. Ref. to BRAKE CONTROL (DIAGNOSTICS)>WORK SUPPORT .
- Check that the applied model and grade of the target vehicle are included, and click the [OK] button.
- If the applied model and grade of the target vehicle are not included, perform "parameter selection and registration". Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)>MAINTENANCE MODE>VDCCM PARAMETER SELECTION .