Auto Start Stop DC/DC CONVERTER 1

EXCEPT FOR MODEL WITH POWER AMPLIFIER
1. Install the Auto Start Stop DC/DC converter 1 to the bracket.
  Tightening torque:
  
  7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
2. Install the Auto Start Stop DC/DC converter 1 to the vehicle.
  Tightening torque:
  
  18 N.m (1.8 kgf-m, 13.3 ft-lb)
3. Connect the connector to the Auto Start Stop DC/DC converter 1, and install the clip.
4. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
MODEL WITH POWER AMPLIFIER
1. Install the Auto Start Stop DC/DC converter 1 to the bracket.
  Tightening torque:
  
  7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
2. Install the Auto Start Stop DC/DC converter 1 and Auto Start Stop DC/DC converter 2 to the vehicle.
  Tightening torque:
  
  18 N.m (1.8 kgf-m, 13.3 ft-lb)
3. Connect the connector to the Auto Start Stop DC/DC converter 1 and Auto Start Stop DC/DC converter 2, and install the clips.
4. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .