Battery Cable Assembly: Removal
- Disconnect the ground terminal (A) and remove the ground cable from the clip (B).
- Disconnect the ground terminal (C) and remove the battery cable holder (D).
- Remove the battery sensor harness from the clip (E).
- Disconnect the terminal (A), terminal (B) and terminal (C).
- Remove the collector cover. Ref. to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>REMOVAL .
- Remove the clip from the air intake boot, and loosen the clamp.
- Remove the air intake boot, and place it aside so that it does not interfere with the work.CAUTION: Be careful not to pull out the PCV hose.
- Disconnect the connector, terminal B and ground terminal.CAUTION: In order to prevent damaging the ground terminal, fix the ground terminal when loosing the bolt, and avoid the part from rotating together while loosening the bolt.
- Disconnect the connector (A), connector (B) and terminal (C).
- Remove the clip (D) and clip (E) that secure the battery cable assembly.
- Disconnect the connector (A), and remove the engine wiring harness from the clip (B).
- Remove the clip (C) from the intake manifold assembly.
- Remove the claw (D) securing the battery cable assembly to the intake manifold assembly and separate the battery cable assembly from the intake manifold assembly.
- Remove the claw securing the battery cable assembly to the bracket and remove the battery cable assembly.