Starter Relay: Inspection
- Check that there is no deformation, cracks or other damages.
- Check the resistance between terminals.
- Starter relay
Terminal No. Inspection conditions Standard 3 - 4 Always 1 MΩ or more 3 - 4 Apply battery voltage between terminals 1 and 2. Less than 1 Ω - Starter cut relay
Terminal No. Inspection conditions Standard 3 - 4 Always 1 MΩ or more 3 - 4 Apply battery voltage between terminals 1 and 2. Less than 1 Ω
- Starter relay