Engine Lubrication System: General Description: Specification
| Lubrication method | Forced lubrication type | ||||
|---|---|---|---|---|---|
| Oil pump | Pump type | Trochoid type | |||
| Number of teeth | pcs. | Inner rotor | 10 | ||
| Outer rotor | 11 | ||||
| Outer rotor diameter x Thickness | mm (in) | 71.4 x 14 (2.81 x 0.55) | |||
| Performance (Oil temperature 120°C (248°F)) | 600 r/min | Discharge pressure | kPa (kg/cm2 , psi) | 34 (0.3, 4.9) | |
| Discharge rate | L (US qt, Imp qt)/min | 5.8 (6.1, 5.1) or more | |||
| 6, 000 r/min | Discharge pressure | kPa (kg/cm2 , psi) | 298 (3.0, 43.2) | ||
| Discharge rate | L (US qt, Imp qt)/min | 46.6 (49.3, 41.0) or more | |||
| Relief valve working pressure (2-step relief) | 1st opening pressure | kPa (kg/cm2 , psi) | 150 (1.5, 21.7) | ||
| Main opening pressure | kPa (kg/cm2 , psi) | 700 (7.1, 101.5) | |||
| Oil filter | Filter type | Full-flow filter type | |||
| Filtration area | cm2 (sq in) | 1, 100 (171) | |||
| By-pass valve opening pressure | kPa (kg/cm2 , psi) | 160 (1.6, 23.2) | |||
| Outer diameter x Width | mm (in) | 68 x 85 (2.68 x 3.35) | |||
| Installation screw specifications | M 20 x 1.5 | ||||
| Oil pressure switch | Type | Immersed contact point type | |||
| Operating voltage | V | 12 | |||
| Warning light operating pressure | kPa (kg/cm2 , psi) | 14.7 (0.1, 2.1) | |||
| Proof pressure | kPa (kg/cm2 , psi) | 981 (10.0, 142.2) | |||
| Engine oil | Total capacity (at overhaul) | L (US qt, Imp qt) | 5.1 (5.4, 4.5) | ||
| When replacing engine oil and oil filter | L (US qt, Imp qt) | 4.2 (4.4, 3.7) | |||
| When replacing engine oil only | L (US qt, Imp qt) | 4.0 (4.2, 3.5) | |||
Engine oil:
Refer to "RECOMMENDED MATERIALS" for engine oil. Ref. to RECOMMENDED MATERIALS .