LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> High Pressure Fuel Pump >> Removal >> High-Pressure Fuel Pump
April 5, 2026: LEMON Manuals is launched! Read the announcement.

High-Pressure Fuel Pump

CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery sensor, Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  2. Remove the collector cover. Ref. to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>REMOVAL .
  3. Remove the clip from the air intake boot, and loosen the clamp.
    G13223823Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the air intake boot, and place it aside so that it does not interfere with the work.
    CAUTION: Be careful not to pull out the PCV hose.
    G13223824Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the high-pressure fuel delivery pipes. Ref. to 1 HIGH-PRESSURE FUEL DELIVERY PIPE .
  6. Disconnect the connector.
    G13223911Courtesy of SUBARU OF AMERICA, INC.
  7. Using TORX PLUS® 40IP, remove the high-pressure fuel pump.
    G11252847Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the fuel pump lifter.
    G11252848Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals