LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System >> Oil Control Solenoid >> Removal >> Intake
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Control Solenoid: Removal: Intake

  1. Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  2. Remove the air intake duct (rear). Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE DUCT>REMOVAL
  3. Disconnect the connector (A) and remove the oil control solenoid.
    G13223960Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the backup ring from the oil control solenoid.
  1. Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  2. Disconnect the connector (A) and remove the oil control solenoid.
    G13223961Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the backup ring from the oil control solenoid.
scientia non olet · About LEMON Manuals