LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) - Introduction >> Inspection Mode >> Procedure >> Inspection Mode J
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Mode J

DTC Description and trouble part Condition Number of driving cycles on the detecting condition
P2610 ECM/PCM ENGINE OFF TIMER PERFORMANCE - 2
  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. Idle the engine for 15 minutes or more.
  3. Turn the ignition switch to OFF.
  4. After at least 10 hours passed from the start of step 3), read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .
scientia non olet · About LEMON Manuals