Inspection Mode G
| DTC | Item | Condition |
|---|---|---|
| P0719 | BRAKE SWITCH "B" CIRCUIT LOW | - |
| P0724 | BRAKE SWITCH "B" CIRCUIT HIGH | - |
| P0951 | AUTO SHIFT MANUAL CONTROL CIRCUIT RANGE/PERFORMANCE | - |
| P170A | L-RANGE SWITCH | - |
Diagnostic procedure:
- Start the engine.
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .
- Operate the stop light switch or the manual mode switch.NOTE: Drive in "D" range and "R" range.
- Read the data of the stop light switch or the manual mode switch using the Subaru Select Monitor. Or measure the terminal voltage.
- Check the readiness code using Subaru Select Monitor, confirm that the diagnosis is completed, and end the procedure. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .