CVT Transaxle System: General Description: Specification
| Transmission | Type | Forward continuously variable speed change, 1-reverse | ||
| Gear ratio (including transfer reduction ratio) | Forward | 3.601 - 0.513 | ||
| Reverse | 3.689 | |||
| Number of forward clutch plates | pcs. | Drive plate | 3 | |
| Driven plate | 3 | |||
| Number of reverse brake plates | pcs. | Drive plate | 4 | |
| Driven plate | 4 | |||
| CVTF capacity | L (US qt, Imp qt) | 11.74 - 12.24 (12.409 - 12.938, 10.332 - 10.772) | ||
| Torque converter | Type | Symmetric, 3-element, single stage, 2-phase | ||
| Nominal | mm (in) | 236 (9.29) | ||
| Clutch | Sprag type one-way | |||
| Stall torque ratio | 2.18 | |||
| Stall speed (at sea level) | r/min | D range | 1, 950 - 2, 550 | |
| R range | 1, 850 - 2, 450 | |||
| Oil pump | Type | Internal gear | ||
| Driving method | Chain drive | |||
| Number of teeth | pcs. | Inner rotor | 8 | |
| Outer rotor | 9 | |||
| Transfer | Type | Multi-plate | ||
| Control method | Electronic hydraulic type | |||
| Number of transfer clutch plates | pcs. | Drive plate | 5 | |
| Driven plate | 5 | |||
| Gear ratio | 1.000 | |||
| Front differential | Type of gear | Hypoid gear | ||
| LSD type | - | |||
| Gear ratio | 3.700 | |||
| Backlash between the differential bevel gear and differential bevel pinion | mm (in) | 0.13 - 0.18 (0.005 - 0.007) | ||
| Hypoid gear set backlash | ||||
| Differential gear oil capacity | L (US qt, Imp qt) | 1.21 - 1.31 (1.279 - 1.385, 1.065 - 1.153) | ||
CVTF:
Refer to "RECOMMENDED MATERIALS" for CVTF. Ref. to RECOMMENDED MATERIALS>RECOMMENDED MATERIALS .
CAUTION:
Always use specified CVTF. Using fluid other than specified CVTF will cause malfunction.
Differential gear oil:
For the differential gear oil, refer to "RECOMMENDED MATERIALS", Ref. to RECOMMENDED MATERIALS>RECOMMENDED MATERIALS .