LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Road Test >> Inspection >> D Range Shift Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

D Range Shift Function

  1. Connect the Subaru Select Monitor.
    CAUTION: Make sure to route the Subaru Select Monitor wires so that they do not disturb the driving.
  2. Turn the ignition switch to ON. (Engine OFF)
  3. Display [Vehicle Speed] and [Actual Gear Ratio].
  4. Make sure that the engine speed is 950 - 1, 400 r/min while driving on the level road at 50 km/h (31 MPH) after accelerating from halting up to 1/4 of accelerator opening angle.
  5. While the vehicle gradually decelerates from the same condition as in step 4 and finally stops, check that [Actual Gear Ratio] changes smoothly according to [Vehicle Speed].
    CAUTION: Make sure to get an assistant on the vehicle and have the person read the data.
scientia non olet · About LEMON Manuals