LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Secondary Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of secondary speed sensor, replace it with a new part.
  1. Install the secondary speed sensor using a new O-ring, and connect the connector.
    NOTE: Apply CVTF to the O-rings.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb)

  2. Install the front exhaust pipe, Ref. to EXHAUST (H4DO)>FRONT EXHAUST PIPE>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  4. Check the CVTF level. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>CVTF>INSPECTION .
scientia non olet · About LEMON Manuals