Turbine Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of turbine speed sensor, replace it with a new part.

Install the turbine speed sensor using a new O-ring, and connect the connector.
NOTE: Apply CVTF to the O-rings.

Tightening torque:

7 N.m (0.7 kgf-m, 5.2 ft-lb)
Install the front exhaust pipe, Ref. to EXHAUST (H4DO)>FRONT EXHAUST PIPE>INSTALLATION .
Connect the ground terminal to battery sensor, Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .