Throttle Body: Removal
- Disconnect the ground terminal from battery sensor, Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
- Drain engine coolant, Ref. to COOLING (H4DO)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT .
- Remove the collector cover, Ref. to INTAKE (INDUCTION) (H4DO)>COLLECTOR COVER>REMOVAL .
- Remove the clip from the air intake boot, and loosen the clamp.
- Remove the air intake boot, and place it aside so that it does not interfere with the work.CAUTION: Be careful not to pull out the PCV hose.
- Disconnect the connector (A) and preheater hose (B).
- Remove the throttle body.