Select Lever: Removal

Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
Release the shift lock using a screwdriver, etc. and shift the select lever to the "N" range.

Courtesy of SUBARU OF AMERICA, INC.
Remove the center exhaust cover.

Courtesy of SUBARU OF AMERICA, INC.
Disconnect the select cable from the transmission main body.
CAUTION: Do not apply excessive load while holding the part (a).

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.
Lower the grip cover vertically. (Model with gate shifter)

Courtesy of SUBARU OF AMERICA, INC.
Lower the boot vertically. (Model with boot shifter)

Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp.

Courtesy of SUBARU OF AMERICA, INC.
Remove the grip.

Courtesy of SUBARU OF AMERICA, INC.
Remove the duct console center. Ref. to AIR CONDITIONER>AIR VENT DUCT>REMOVAL>CONSOLE DUCT>CENTER .
Remove the harness.

Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector.

Courtesy of SUBARU OF AMERICA, INC.
Remove the select lever.
CAUTION: Be careful not to apply a load to the select cable.

Courtesy of SUBARU OF AMERICA, INC.
Remove the select cable. Ref. to CONTROL SYSTEMS>Select Cable>REMOVAL .