LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control/Communication System >> Gateway Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gateway Control Module: Installation

CAUTION: When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system.
  • For model without keyless access with push button start, refer to the Type G in "REGISTRATION MANUAL FOR IMMOBILIZER". (Except for model for CO, C5)
  • For model without keyless access with push button start, refer to the Type I in "REGISTRATION MANUAL FOR IMMOBILIZER". (CO, C5)
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Install the central gateway control module.
  2. Install the speaker assembly center. Ref. to ENTERTAINMENT & MONITORING>FRONT SPEAKER>INSTALLATION .
  3. Install the center information display assembly and the ornament panel mid passenger. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>INSTALLATION .
  4. Install the cover assembly front. Ref. to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>INSTALLATION .
  5. Install the grip and boot. Ref. to CONTROL SYSTEMS>SELECT LEVER>INSTALLATION .
  6. Install the cover center UPR or the driver monitoring unit assembly. Ref. to INSTRUMENTATION/DRIVER INFO>DRIVER MONITORING UNIT>INSTALLATION .
  7. Install the visor assembly. Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER>INSTALLATION .
  8. Install the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>INSTALLATION .
  9. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals