Inspection Mode 1
| DTC | Description & trouble part | Note |
|---|---|---|
| B1A00 | Front Relay Control Module Non-Volatile Memory | - |
| B1A01 | Front Relay Control Module Battery (Control) Power Supply | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Front Relay Control Module]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Front Relay Control Module] to check that there is no DTC displayed. Ref. to Front Relay Control Module (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Disconnect and reconnect the battery, and then wait for one minute or more.
- Using the Subaru Select Monitor, read the DTC of [Front Relay Control Module] to check that there is no DTC displayed. Ref. to Front Relay Control Module (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.