Inspection Mode 4
| DTC | Description & trouble part | Note |
|---|---|---|
| B1A04 | Head Lamp Lo LH Circuit Current High | - |
| B1A06 | Head Lamp Lo RH Circuit Current High | - |
| B1A08 | Head Lamp Hi LH Circuit Current High | - |
| B1A0A | Head Lamp Hi RH Circuit Current High | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Front Relay Control Module]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Front Relay Control Module] to check that there is no DTC displayed. Ref. to Front Relay Control Module (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Set the ignition switch to ON, lighting Lo SW to ON, and lighting Hi SW to ON.
- Using the Subaru Select Monitor, read the DTC of [Front Relay Control Module] to check that there is no DTC displayed. Ref. to Front Relay Control Module (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.