Inspection Mode 2
| DTC | Description and trouble part | Note |
|---|---|---|
| B2B01 | Driver's Door Power Window Manual Up Switch Stuck | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Window (Driver)]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Ref. to Power Window (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Pull up the driver's side power window switch and check that the window rolls up.
- Using the Subaru Select Monitor, read the DTC of [Power Window (Driver)] to check that there is no DTC displayed. Ref. to Power Window (Diagnostics)>Diagnostic Trouble Code (DTC) .
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.