Inspection Mode 9

Diagnostic procedure:

1. Using the Subaru Select Monitor, perform the clear memory of [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
2. Using the Subaru Select Monitor, read the [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)] DTC and check that the concerned DTC is not displayed. Ref. to Power Window (Diagnostics)>Diagnostic Trouble Code (DTC) .
   NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
3. Pull up the passenger's side, rear right or rear left power window switch and check that the window rolls up.
4. Using the Subaru Select Monitor, read the [Power Window (Passenger)], [Power Window (Rear Right)] or [Power Window (Rear Left)] DTC and check that the concerned DTC is not displayed. Ref. to Power Window (Diagnostics)>Diagnostic Trouble Code (DTC) .