LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Parking Brake Switch: Installation

  1. Install the switch assembly EPB.

    Tightening torque: 

    3.2 N.m (0.3 kgf.m, 2.4 ft.lb)

  2. Install the cord assembly console to the switch assembly EPB.
  3. Install the cover assembly front. Ref. to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: After connecting the ground terminal to the battery sensor, place the select lever in the "P" position.
scientia non olet · About LEMON Manuals