Software Update

Connect the USB drive containing valid software update files for the cockpit control module, and then click "Software Update" to display updatable ECMs.

Check the software version, and select OK to perform software update.

Follow the instructions on the screen, and start the vehicle again as necessary.

ECM variation is below.

• MSOC
• V-CPU
• DSP
• Radio Tuner
• CID
• SXM
• MAP
• ETC
  NOTE:

  • User cannot operate information bar area, Climate control, and Home SW.
  • CCM has two program partition.
  • One is foreground partition (program running partition) and the other is background partition (mirror partition).
  • Once software update finished, the new program is copied from foreground partition to background partition to prepare for next update.
  • While this process is running, user cannot start another software update.