LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Electrical >> Gauges >> Driver Monitor (Diagnostics) >> Work Support >> Operation >> Write ECU setting save data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Write ECU setting save data

  1. On [Start] screen, select [Diagnosis].
  2. On [Select Vehicle] screen, input the target vehicle information and select [OK].
  3. On [Main Menu] screen, select [Each System].
  4. On [Select System] screen, select [Driver Monitor], and then select [Next].
  5. On [Select Function] screen, select [Work Support].
  6. On [Work Support] screen, select [Write ECU setting save data].
  7. Perform the operation according to the display screen.
  8. After the procedure is finished, it is necessary to set the Driver Monitoring System to CAN sleep status and then restart it so that the write data is properly reflected.
    NOTE:
    • To set to CAN sleep status, turn the ignition switch to OFF, and wait for a while with all the doors and the rear gate closed.
    • Turning off of the Driver Monitoring System LED can be used as a reference of CAN sleep status. After that, the write data will be reflected by activating the Driver Monitoring System function.
    • CAN sleep may not occur when the access key is located near the vehicle, so keep the access key away from the vehicle while waiting.
scientia non olet · About LEMON Manuals