0A Can Communication Failure
Detecting condition:
When CAN communication error is detected while the EyeSight system automatically stops the vehicle and during Auto Start Stop operation.
Trouble symptom:
Buzzer sounds and the Auto Start Stop is canceled.
- CHECK DTC
.
Read the DTC of [Auto Start Stop] using the Subaru Select Monitor. Ref. to AUTO START STOP (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
Are any DTCs displayed?
Yes: Perform the diagnosis according to the DTC. Ref. to AUTO START STOP (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
No: Perform the diagnosis for LAN system. Ref. to LAN SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .