Front Toe-In

When adjusting the toe-in, adjust it to the following value.

Toe-in: Adjustment value 

0±2 mm (0±0.08 in)

1. Check that the left and right wheel steering angles are within specification.
2. Loosen the tie-rod end lock nuts on the left and right sides.

   Courtesy of SUBARU OF AMERICA, INC.

3. Turn the left and right tie-rods by equal amounts until the toe-in is at the specification.
   NOTE: Both the left and right tie-rods are right-hand threaded. To increase toe-in, turn both tie-rods clockwise by equal amount (viewing from the inside of vehicle).
4. Tighten the tie-rod end lock nut.

   Tightening torque: 

   85 N.m (8.7 kgf-m, 62.7 ft-lb)

5. Correct the boot steering gearbox if it is twisted.