Check Resistance Between Terminals And Perform Unit Inspection

Courtesy of SUBARU OF AMERICA, INC.

1. Measure the resistance between "P range" switch connector terminals.

   Terminal No.	Inspection conditions	Standard
   1 - 2	P range	Less than 1 Ω
   	Except for P range	1 MΩ or more

2. Measure the resistance between the shift lock solenoid connector terminals.

   Terminal No.	Inspection conditions	Standard
   4 - 3	-	27.6 - 30.5 Ω

3. Check the shift lock solenoid unit.

   Terminal No.	Inspection conditions	Standard
   3 (+) - 4 (-)	Apply battery voltage.	The shift lock solenoid operates properly.