Select Cable: Removal

Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Remove the mat center tray.

Courtesy of SUBARU OF AMERICA, INC.
Release the shift lock using a screwdriver, etc. and shift the select lever to the "N range".

Courtesy of SUBARU OF AMERICA, INC.
Remove the center exhaust cover.
H4DO model:

Ref. to EXHAUST (H4DO)>REAR EXHAUST PIPE>REMOVAL .

H4DOTC model:

Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>REMOVAL .
Disconnect the select cable from the transmission main body.
CAUTION: Do not apply excessive load while holding the part (a).

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.
Remove the adjusting nut (rear).

Courtesy of SUBARU OF AMERICA, INC.
Raise the claw of clamp and remove the select cable together with the clamp.
CAUTION: Do not apply excessive load while holding the part (a).

Courtesy of SUBARU OF AMERICA, INC.

Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp from the select cable.
Remove the cable plate.

Courtesy of SUBARU OF AMERICA, INC.