LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Touring XT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (2.4L) >> Knock Sensor >> Installation >> LH Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

LH Side

  1. Using a claw-foot wrench, install the knock sensor and connect the connector (A).
    NOTE:
    • Knock sensor must be positioned so that the connector center comes within the range shown in the figure.
    • Make sure that the knock sensor and its connector do not touch the adjacent parts.
    G13948391Courtesy of SUBARU OF AMERICA, INC.

    Tightening torque: 

    Calculation formula
    T= 25 N.m (2.5 kgf-m, 18.4 ft-lb) x L1/(L1+L2)
    T: Reading of the torque wrench
    L1: Effective length of the torque wrench
    L2: Effective length of the crowfoot wrench
     
    NOTE: If the effective length of the tool used is unknown, consult the manufacturer of the tool.
    G13948392Courtesy of SUBARU OF AMERICA, INC.
    G13948393Courtesy of SUBARU OF AMERICA, INC.
  2. Install the connector (A) and clip (B).
    G13948394Courtesy of SUBARU OF AMERICA, INC.
  3. Install the clip (D) and clip (E), and connect the connector (A), connector (B) and connector (C).
    G13948395Courtesy of SUBARU OF AMERICA, INC.
  4. Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals