Auto Headlight Beam Leveler Control Module: Installation
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION
.
- Install the auto headlight beam leveler CONTROL MODULE.
- Install the relay & fuse box.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the fuse holder.
- Install the knee airbag module. Refer to AIRBAG SYSTEM>KNEE AIRBAG MODULE>INSTALLATION
.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the cover assembly - instrument panel LWR driver.
- Connect the battery ground terminal. Refer to NOTE>NOTE>BATTERY .
- Perform initialization and reinitialization of the auto headlight beam leveler system. Refer to LIGHTING SYSTEM>AUTO HEADLIGHT BEAM LEVELER SYSTEM>PROCEDURE .